To look at Cable TV Into an invisible TV

The idea of not having to handle messy wires and cables is what makes wireless TV appealing to many people. Fortunately, a cable TV can be converted to a wireless TV efficiently. The technology is simple really, there is a transmitter and the masai have a receiver. They operate together to get the signal from the cable box and transmit those same signals into the receiver and television. The audio and video work pretty well and it will be a regarding satisfaction for people that want to lower their cable TV fees - the wireless signals could be received by a large number of TVs which include the receivers so sending signals to much more two TV numerous rooms within a home is not only possible, but very cost efficient and convenient as well. Follow the simple instructions below to convert your cable TV into a wireless TV. 1. Screw regarding cable wired inside wall or from the RF OUT or radio frequency within the cable box straight into the RF IN at the RF sending device you have. Open and then direct the plastic paddle towards direction where you mean the signal transmission to go. 2. Get the AC adapter of the sender and this into an avenue. Turn the unit on and switch to Channel 1. 3. Screw one end of the coaxial cable into the receiver and the other end into the RF Input or COAX Input at the back of the TV, Open and then direct the plastic paddle into the direction of the sending device. Turn the channel for this receiver to Channel 1 and then plug in the receiver. Power it on. 4. The TV should be tuned in to Channel 3. Fine tune the sending and receiver devices until there is clear picture and good sound coming out of the TV. Continue to fine tune just before best video and sound is satisfied. Enjoy!